Installation Manual
MMI-20039473
Figure 4-7: Channel A mA/HART output wiring
A. Hazardous area
B. Non-hazardous area
C. mA/HART output
D. 250–600 Ω resistance
E. 24V nominal
F. HART device
4.8
Wire the Channel B and C mA Output
Wire the mA Output in explosion-proof, intrinsically safe, or nonhazardous installations.
Meter installation and wiring should be performed only by suitably-trained personnel
using the appropriate government and corporate safety standards.
Procedure
Wire to the appropriate output terminal and pins.
Installation Manual
WARNING
Wiring the channels
October 2022
31