Renault Laguna III Manual page 2362

MECHANICAL COMPONENT CONTROLS
Brake pedal link rod: Removal - Refitting
RIGHT-HAND DRIVE
a Connect the accelerator pedal potentiometer con-
nector.
a Clip on the wiring.
a Refit the shaft (9) :
- insert the shaft upwards,
- lock the shaft by clipping it to the left.
a Remove the securing pin (Fre. 1752).
a Refit the brake light switch (see 37A, Mechanical
component controls, Brake pedal switch: Re-
moval - Refitting, page 37A-29) .
III - FINAL OPERATION.
a Refit:
- the clutch pedal (see 37A, Mechanical compo-
nent controls, Clutch pedal: Removal - Refit-
ting, page 37A-39) ,
- the dashboard cross member (see Dashboard
cross member: Removal - Refitting) (MR 416,
42A, Upper front structure),
- the dashboard (see Dashboard: Removal - Refit-
ting) (MR 416, 57A, Interior equipment).
a Connect the battery (see Battery: Removal - Refit-
ting) (MR 415, 80A, Battery).
109879
37A-28
37A