Renault Laguna III Manual page 1945

Automatic gearbox: Removal - Refitting
V9X, and AJ0
- the protection and switching unit (see Protection
and Switching Unit: Removal - Refitting) (87G,
Engine compartment connection unit),
- the radiator mounting cross member (see Radiator
mounting cross member: Removal - Refitting)
(41A, Front lower structure),
- the additional radiator (see Additional radiator:
Removal - Refitting) (19A, Cooling),
- the electric coolant pump of the intercooler (see
Electric coolant pump: Removal - Refitting)
(19A, Cooling),
- the pre-postheating unit (see Pre-postheating
unit: Removal - Refitting) (13C, Preheating),
- the front impact cross member (see Front impact
cross member: Removal - Refitting) (41A, Front
lower structure),
- the « radiator - condenser - intercooler » assembly
(see Cooling radiator: Removal - Refitting) (19A,
Cooling),
- the engine cooling fan assembly (see Engine
cooling fan assembly: Removal - Refitting)
(19A, Cooling),
- the front end panel (see Front end panel: Remov-
al - Refitting) (42A, Upper front structure),
- the bonnet catch (see Bonnet lock: Removal -
Refitting) (52A, Non-side opening element mecha-
nisms),
- the audible warning (see Audible warning: Re-
moval - Refitting) (82B, Horn),
- the air filter unit (see Air filter unit: Removal - Re-
fitting) (12A, Fuel mixture),
- the front right-hand driveshaft (see 29A, Drive-
shafts, Front right-hand driveshaft: Removal -
Refitting, page 29A-7) ,
- the front left-hand driveshaft (see 29A, Drive-
shafts, Front left-hand driveshaft: Removal -
Refitting, page 29A-1) ,
- the headlights (see Headlight: Removal - Refit-
ting) (80B, Headlights).
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Perform the following operations:
- fill up and bleed the cooling system (see Cooling
system: Draining - Refilling) (19A, Cooling),
- fill up the gearbox oil (see 23A, Automatic gear-
box, Automatic gearbox oil: Draining - Filling,
page 23A-29) ,
AUTOMATIC GEARBOX
- fill the refrigerant circuit using a refrigerant charg-
ing station (see Refrigerant circuit: Draining -
Filling) (62A, Air conditioning).
- fill and bleed the power-assisted steering circuit
(see Power-assisted steering circuit: Bleeding)
(36B, Power-assisted steering),
- a leak test (see Refrigerant circuit: Check) (62A,
Air conditioning).
a Check that the air conditioning is working correctly
(see Air conditioning: Check) (62A, Air condition-
ing).
a Refit:
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion),
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the engine undertray.
a Adjust the headlight beams (see Headlight: Adjust-
ment) (80B, Headlights).
a Refit the engine cover.
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select « Gearbox computer » ,
- go to repair mode,
- display the « before/after repair procedure » for the
computer selected,
- carry out the operations described in the « After re-
pair procedure » section.
23A-27
23A