Mechanical Component Controls; Master Cylinder: Removal - Refitting - Renault Laguna III Manual

MECHANICAL COMPONENT CONTROLS

Master cylinder: Removal - Refitting
Tightening torquesm
master cylinder nuts
brake pipes
brake fluid reservoir bolt
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove the front engine cover.
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the air filter unit (see Air filter unit: Re-
moval - Refitting) (12A, Fuel mixture).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the brake fluid reservoir connector (1) .
a Drain the brake fluid reservoir.
PK4 or TL4
a Disconnect the clutch master cylinder pipe on the
20 N.m
brake fluid reservoir at (4) .
14 Nm
7 N.m
a
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
a Remove the bolt (2) from the max fuse box (3) .
a Move the max fuse box to one side (3) .
122724
37A-1
37A
123949