Renault Laguna III Manual page 2260

Track rod: Removal - Refitting
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Screw the track rod back in place by the number of
turns noted during removal.
a Fit the track rod end in the hub carrier.
a Refit the track rod ball joint nut.
a Tighten to torque:
- the track rod ball joint nut (37 N.m),
- the wheel alignment adjusting lock nut (53
N.m).
II - FINAL OPERATION
a Refit the wheel (see 3 5 A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Check the axle geometry (see 30A, General infor-
mation, Axle assemblies: Check, page 30A-19) .
a If necessary, adjust the geometry of the axle assem-
blies (see 30A, General information, Front axle
system: Adjustment, page 30A-28) .
STEERING ASSEMBLY
36A-9
36A