Renault Laguna III Manual page 2578

Compressor: Removal - Refitting
F4R or K4M or K9K or M4R or M9R, and AIR CONDITIONING 01 or AIR CONDITIONING 02
a Disconnect the compressor connectors (2) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the compressor bolts (3) ,
- the compressor from below.
AIR CONDITIONING
122879
122878
62A-22
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace the compressor connecting pipe
seals,
WARNING
Do not remove the blanking plugs from each
component until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehi-
cle.
Note:
When replacing the compressor due to damage,
it is essential to replace the filter for the dehydra-
tor reservoir (see 62A, Air conditioning, Dehy-
drator reservoir filter: Removal - Refitting,
page 62A-18) .
Note:
For the quantity of oil to add when replacing a
compressor (see 6 2 A , Air conditioning, Air
conditioning: Parts and consumables for the
repair, page 62A-2) .
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the compressor.
a Torque tighten the compressor bolts (25 N.m).
III - FINAL OPERATION
a Remove the blanking plugs.
a Connect the compressor connectors.
WARNING
To avoid any leaks, check that the pipe surface is
sound before positioning the new seal. The sur-
face must be clean and scratch free.
62A