Power Assisted Steering; Power-Assisted Steering Pump: Removal - Refitting - Renault Laguna III Manual

POWER ASSISTED STEERING

Power-assisted steering pump: Removal - Refitting
F4R
Special tooling required
Ms. 583 Pipe clamps.
Mot. 1448 Remote operation pliers for
hose clips.
Tightening torquesm
high pressure pipe
union on the power-
assisted steering pump
high pressure pipe
bracket bolt on the
power-assisted steering
pump
IMPORTANT
Consult the safety and cleanliness advice and oper-
ation recommendations before carrying out any
repair (see 36A, Steering assembly, Steering:
Precautions for the repair, page 36A-4) .
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Unclip the power-assisted steering fluid reservoir.
a Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray,
- the front right-hand wheel (see 35A, Wheels and
tyres, Wheel: Removal - Refitting, page 35A-1) ,
- the front right-hand wheel arch liners (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the accessories belt (see Accessories belt: Re-
moval - Refitting) (11A, Top and front of engine).
21 Nm
8 N.m
36B-1
36B