Renault Laguna III Manual page 1967

Hydraulic distributor: Removal - Refitting
V9X, and AJ0
a Tilt the hydraulic distributor slightly when refitting it in
order to engage it with the automatic gearbox lever
(5) .
a Torque tighten the hydraulic distributor bolts (8
Nm).
a Connect the internal wiring connector.
III - FINAL OPERATION
a Refit:
- a new hydraulic distributor housing seal,
- the hydraulic distributor housing.
a Torque tighten the hydraulic distributor housing
bolts (8 Nm).
a Refit:
- the power-assisted steering pipe bolt,
- the intercooler air inlet pipe.
a Fit the clip for the intercooler air inlet pipe to the in-
tercooler.
a Connect the air pipe between the rigid pipe and the
hose at the turbocharger outlet.
a Tighten the clip for the air pipe between the rigid
pipe and the hose at the turbocharger outlet.
a Refit the nut for the turbocharger air outlet pipe.
a Fit the turbocharger air outlet pipe.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
AUTOMATIC GEARBOX
117254
a Top up the automatic transmission (see 23A, Auto-
matic gearbox, Automatic gearbox oil: Draining -
Filling, page 23A-29) .
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select « Gearbox computer » ,
- go to repair mode,
- display the « before/after repair procedure » for the
computer selected,
- select « Hydraulic distributor » in the section « List
of components controlled by this computer » ,
- carry out the operations described in the « After re-
pair procedure » section.
a Refit the engine undertray.
23A-49
23A