Renault Laguna III Manual page 2113

FRONT AXLE COMPONENTS
Front brake disc protector: Removal - Refitting
WITHOUT WHEEL DISC PROTECTOR
a Remove:
- the ball joint protector bolt (5) ,
- the ball joint protector (6) .
REFITTING
I - REFITTING PREPARATION OPERATION
a Using a wire brush and SURFACE CLEANER (see
Vehicle: Parts and consumables for the repair)
(04B, Consumables - Products) clean the hub carri-
er.
II - REFITTING OPERATION FOR PART
CONCERNED
WITHOUT WHEEL DISC PROTECTOR
a Refit:
- the ball joint protector,
- the ball joint protector bolt.
a Torque tighten the ball joint protector bolt (8 N.m).
WHEEL DISC PROTECTOR
a Refit:
- the brake disc protector,
- the disc protector bolts.
a Torque tighten the brake disc protector bolts (8
N.m).
III - FINAL OPERATION
a Refit:
- the brake disc (see 31A, Front axle components,
Front brake disc: Removal - Refitting, page 31A-
16) ,
- the calliper and calliper support assembly (see
31A, Front axle components, Front brake calli-
per mounting: Removal - Refitting, page 31A-
12) .
122713
a Set the wheels straight ahead.
a Attach the brake hose to the shock absorber.
a Refit the front wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
IMPORTANT
To avoid any accident, bring the pistons, brake
pads and brake discs into contact by depressing
the brake pad several times.
31A-15
31A