Renault Laguna III Manual page 2710

Remote headlight beam adjustment actuator: Removal - Refitting
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a
Note:
When refitting a new beam adjustment actuator,
tighten the beam adjustment bolt by a few turns.
a Remove the sealing cover (4) .
HEADLIGHTS
124388
a Keep the reflector shell (headlight lens unit) towards
a Fit the ball joint (6) into the reflector shell groove (7) .
a Refit the beam adjustment actuator by turning it an
a Refit the sealing cover.
80B-24
the rear of the headlight while pulling the bulb (5) .
Note:
The ball joint should not just be in contact with
the groove; it should be fitted into it.
eighth of a turn towards the vehicle interior.
80B
124390
123421