Renault Laguna III Manual page 2551

Distribution motor: Removal - Refitting
AIR CONDITIONING 01 or AIR CONDITIONING 02
a
Note:
T o ensure that the system operates correctly,
program all of the flap stops.
a Switch on the air conditioning control panel by
pressing the « + » button (31) .
a Increase the air flow by pressing the « + » button
(31) again.
a Check that the air flow increases as the speed of the
passenger compartment fan assembly increases.
Note:
If during the check, the air flow does not increase
or the number of propeller blades on the control
panel display remains unchanged, programming
of the flap stops was not performed correctly.
It is therefore necessary to repeat the previous
assembly operations.
HEATING
135290
61A-54
61A