Renault Laguna III Manual page 2212

Complete rear axle system: Removal - Refitting
4-WHEEL STEERING
a Put the rear axle in « half-load » position.
Note:
The « half-load » position corresponds to a
length of (488 mm) between the upper shock
absorber bolt and the rear axle opening of the
lower shock absorber bolt.
a Tighten to torque:
- the new bolts of the rear axle in « half-load
position » (180 N.m),
- the new lower bolts of the shock absorber (115
N.m).
DISCHARGE LAMPS
a Clip on the headlight beam adjustment sensor link-
age.
a Refit:
- the rear axle guards,
REAR AXLE COMPONENTS
- the exhaust silencer (see Silencer: Removal - Re-
fitting) (19B, Exhaust),
- the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
a Torque tighten the rear guard bolts (8 N.m).
33A-45
33A
124696