4-Wheel Steering Computer: Removal - Refitting - Renault Laguna III Manual

4-wheel steering computer: Removal - Refitting
4-WHEEL STEERING
Tightening torquesm
four wheel steering
computer nuts
earth strap nut
bolts on the automatic
parking brake control
unit support
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair
- (see 33A, Rear axle components, Rear axle
components: Precautions for the repair, page
33A-1) ,
- (see Vehicle: Precautions for the repair) .
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
REAR AXLE COMPONENTS
8 N.m
8 N.m
21 N.m
a Remove:
- the bolts (1) from the automatic parking brake con-
trol unit support,
- the exhaust silencer (see Silencer: Removal - Re-
fitting) (19B, Exhaust).
a Remove:
- the silencer heat shield clips (2) ,
- the bolt (3) from the silencer heat shield,
- the silencer heat shield (4) .
33A-58
33A
124244
128421