Renault Laguna III Manual page 2857

NAVIGATION AID 1 LEVEL
a Mark the routing of the wiring and the aerials.
WARNING
T o ensure correct operation:
- do not pinch the aerial cables,
- do not bend the aerial cables,
- do not force the aerial cables when refitting.
a Mark the aerial position on the unit.
a Disconnect the aerials on the navigation screen.
a Disconnect:
- the connector of the navigation screen,
- the connector of the seat belt reminder warning
light.
a Remove:
- the display bolts,
- the display.
WITHOUT NAVIGA TION AID
a Unclip the display from its mounting at (4) .
RADIO
Display: Removal - Refitting
125356
REFITTING
I - REFITTING PREPARATION OPERATION
NAVIGATION AID 1 LEVEL
a When replacing the navigation computer, always re-
place the SD card.
II - REFITTING OPERATION FOR PART
CONCERNED
NAVIGATION AID 1 LEVEL
a
WARNING
Do not press on the screen as this may damage
it.
a Connect the aerials in the position marked during re-
moval.
WARNING
To ensure correct operation:
- do not pinch the aerial cables,
- do not bend the aerial cables,
- do not force the aerial cables when refitting.
a Connect:
- the connector of the navigation screen,
- the connector of the seat belt reminder warning
light.
a Refit the display.
III - FINAL OPERATION
NAVIGATION AID 1 LEVEL or NAVIGATION AID 4
or NAVIGATION AID 6
a Clip on the upper trim of the display.
a Clip on the dashboard strip.
86A-26
86A