Filter Unit Assembly: Removal - Refitting - Renault Laguna III Manual

FRONT AXLE COMPONENTS
Filter unit assembly: Removal - Refitting
Equipment required
Diagnostic tool
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see 31A, F ront axle components, Front
axle components: Precautions for the repair,
page 31A-1) .
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a
Note:
It is necessary to lock the airbag computer in
order to unlock the steering column.
Lock the airbag computer. Apply the before repair
procedure using the Diagnostic tool :
- connect the Diagnostic tool,
- select « Airbag computer » ,
- go to repair mode,
- apply the « Before repair procedure » .
a Remove:
- the front wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) ,
- the shock absorber (see 31A, Front axle compo-
nents, Front shock absorber and spring: Re-
moval - Refitting, page 31A-47) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
a Separate the various components of the « spring -
shock absorber » assembly.
a Visually check the condition of the component parts
of the filter unit.
a All faulty components must be replaced.
31A-53
31A
frontal impact stop
upper cup
front filter unit
retainer cup
bolt
nut
rebound cup
nut
112817