Renault Laguna III Manual page 2033

Front left-hand driveshaft: Removal - Refitting
PK4
REFITTING
I - REFITTING PREPARATIONS OPERATION
a Part always to be replaced:
- differential output seal (see 21A, Manual gearbox,
Differential output seal: Removal - Refitting,
page 21A-6) .
a Consumables for repair:
- gearbox oil (see 21A, Manual gearbox, Manual
gearbox oil: Specifications, page 21A-1) (Tech-
nical Note 6012A, 04A, Lubricants).
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit the driveshaft into the gearbox as horizontally as
possible.
a Engage the driveshaft into the stub axle carrier.
Note:
The driveshaft must fit freely into the stub-axle
carrier until it protrudes enough for the hub nut to
be fitted.
a Refit:
- the shock absorber base bolts,
- the shock absorber base nuts.
a Torque tighten the shock absorber base nuts (180
Nm).
a Position the track rod.
a Torque tighten the track rod end nut (37 Nm).
a Refit the hub nut.
a Torque tighten the hub nut (105 Nm) immobilising
the hub with the (Rou. 604-01).
a Clip:
- the brake hose,
- the wheel speed sensor wiring.
III - FINAL OPERATION.
a Refit the front left-hand wheel (see Wheel: Removal
- Refitting) (MR 415, 35A, Wheels and tyres).
a Fill the gearbox and check the level (see 21A, Man-
ual gearbox, Manual gearbox oils: Draining - Fill-
ing, page 21A-2) .
a Refit:
- the engine undertray,
DRIVESHAFTS
29A-4
- the engine undertray bolts.
29A