Renault Laguna III Manual page 2052

Table of Contents

Advertisement

Front right-hand driveshaft gaiter, gearbox side: Removal - Refitting
a Remove the lock ring (4) .
Note:
Mark the position of the spider before extracting
it.
a Remove:
- the spider (5) ,
- the driveshaft gaiter (6) from the propeller shaft.
DRIVESHAFTS
109409
127992
29A-23
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the driveshaft gaiter,
- the locking ring,
- the large tightening clip,
- the small tightening clip.
a Clean the propeller shaft, the spider and the yoke
sleeve using a parts washer.
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit the small tightening clip (6) on the propeller shaft.
a Lightly lubricate the propeller shaft using the grease
supplied with the gaiter to facilitate its fitting.
29A
128412

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents