Renault Laguna III Manual page 2595

Expansion valve: Removal - Refitting
F4R, and AIR CONDITIONING 01 or AIR CONDITIONING 02
a Fit the (Car. 1363).
Note:
T o carry out the check correctly, place the end
piece of the detector tool as close to the retaining
bracket as possible by removing the foam seals
using the (Car. 1363).
a Check there are no leaks using the electronic de-
tector (see 62A, Air conditioning, Refrigerant cir-
cuit: Check, page 62A-6) .
a Remove the (Car. 1363).
a Check that the air conditioning system is operating
correctly (see 62A, Air conditioning, Air condi-
tioning: Check, page 62A-3) .
a Fit the lower heat shield.
a Clip on the lower heat shield.
a Refit the upper heat shield.
a Clip on the upper heat shield.
a Refit:
- the scoop under the scuttle panel grille (see Scoop
under the scuttle panel grille: Removal - Refit-
ting) (MR 416, 56A, Exterior equipment).
- the scuttle panel grille (see Scuttle panel grille:
Removal - Refitting) (MR 416, 56A, Exterior
equipment),
- the windscreen wiper arms (see Windscreen wip-
er arm: Removal - Refitting) (MR 415, 85A, Wip-
ing - Washing).
AIR CONDITIONING
62A-39
62A