Renault Laguna III Manual page 2361

MECHANICAL COMPONENT CONTROLS
Brake pedal link rod: Removal - Refitting
RIGHT-HAND DRIVE
a Unclip the wiring at (5) .
a Disconnect the accelerator pedal potentiometer con-
nector (6) .
a Insert the (Fre. 1752), from left to right at (7) to lock
the brake pedal safety system.
a Remove:
- the brake pedal plate nuts (8) ,
- the « brake pedal link rod - brake pedal » assem-
bly.
123689
a Remove:
- the nut (10) from the brake pedal link rod shaft,
- the brake pedal link rod shaft,
- the brake pedal link rod.
REFITTING
I - REFITTING PREPARATIONS OPERATION
a Always replace the double safety connecting piece.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the brake pedal link rod,
- the brake pedal link rod shaft,
- the brake pedal link rod shaft nut.
a Tighten the brake pedal link rod shaft nut.
a Refit:
- the « brake pedal link rod - brake pedal » assem-
bly,
- the brake pedal plate nuts,
- the brake pedal link rod plate nuts.
a Torque tighten:
- the brake pedal plate nuts (21 Nm),
- the brake pedal link rod plate nuts (21 Nm).
37A-27
37A
123687