Tn2302Ap Ip Media Processor - Avaya S8700 Manual

Install and Administer IP Connectivity Hardware
1
Type ping ip-address ipaddress board UUCSS and press
address of a computer on the same subnet and UUCSS is the cabinet, carrier, and slot of the
TN799DP C-LAN circuit pack that is used to send the ping.
ping ip-address 192.168.10.21
End-pt IP
192.168.10.21
2
If step 1 passes, type ping ip-address ipaddress board UUCSS and press
is the IP address of the customer's gateway.
3
If step 2 passes, type ping ip-address ipaddress board UUCSS and press
is the IP address of a computer beyond the gateway.
The TN799DP C-LAN circuit pack is now installed in the media gateway and connected to the IP
network.

TN2302AP IP Media Processor

The TN2302AP IP Media Processor provides on interface between a customer's IP network and Avaya
media gateways. This interface is used to transport voice and FAX between the media gateways and IP
devices such as H.323 V2 compliant endpoints and other Avaya telephone systems. Each TN2302AP can
support between 32 and 64 voice channels, depending on the codecs used.
The following sections describe the process:
•
Check your shipment
•
Install a TN2302AP IP Media Processor
•
Install the cables
•
Install the circuit packs
•
Administer the IP Media Processor
•
Test the external connection to the LAN
For further administration, refer to the Administration for Network Connectivity for Avaya
Communication Manager (555-233-504).
20
PING RESULTS
Port Port Type
01A13 CLAN
NOTE:
The P board suffix designation means the circuit pack is firmware-downloadable. Click
the Upgrading tab above and go to "Upgrade firmware on programmable circuit packs"
for more information.
on page 21
on page 22
on page 23
Enter
Result Time(ms)
PASS 10
on page 21
on page 23
on page 24
, where ipaddress is the IP
Error Code
Enter , where ipaddress
Enter , where ipaddress
Adding New Hardware--S8700
November 2003