Ipmedpro (Ip Media Processor Circuit Pack) - Avaya S8700 Maintenance Manual

IPMEDPRO (IP Media Processor Circuit Pack)

IPMEDPRO (IP Media Processor
Circuit Pack)
MO's Name
(in Alarm
Log)
IPMEDPRO
IPMEDPRO
IPMEDPRO
1. UU is the universal cabinet number (1–64 for ATM PNC, 1–44 for CSS PNC). C is the carrier
designation (A, B, C, D, or E). SS is the number of the slot where the circuit pack resides (01–21).
The TN2302 (IP Media Processor) circuit pack is the next generation VOIP
platform. The TN2302 includes a 10/100 BaseT Ethernet interface to support IP
audio for IP trunks and H.323 endpoints. The TN2302 can perform echo
cancellation, silence suppression, DTMF detection, and conferencing. It supports
the following codecs, fax detection for them, and conversion between them:
G.711 (mu-law or a-law, 64 kbps)
G.723.1 (6.3-kbps or 5.3-kbps audio)
G.729A (8-kbps audio)
The TN2302 circuit board is used to provide voice over IP connectivity. The
TN2302 to acts as a service circuit to terminate generic RTP streams used to
carry packetized audio over an IP network. As part of the overall H.323
implementation, the TN2302 circuit pack handles the audio streams while the
TN799DP C-LAN handles the TCP/IP signaling channels. This MO applies only
to a TN2302.
555-233-143
Alarm Initial SAT Command to
1
Level Run
MAJOR test board UUCSS sh
MINOR test board UUCSS l
WARNING test board UUCSS sh
Full Name of MO
IP Media Processor circuit
pack
IP Media Processor circuit
pack
IP Media Processor circuit
pack
Issue 1 May 2002 8-929