The Tn2302Ap Ip Media Processor; Check Your Shipment - Avaya S8700 Installing Manual

118
Connecting to the Customer's Network

The TN2302AP IP Media Processor

The TN2302AP IP Media Processor provides on interface between a customer's IP network and
Avaya media gateways. This interface is used to transport voice and FAX between the media
gateways and IP devices such as H.323 V2 compliant endpoints and other Avaya telephone
systems. Each TN2302AP can support between 32 and 64 voice channels, depending on the
codecs used.
NOTE:
The P board suffix designation means the circuit pack is firmware-downloadable. Click
the Upgrading tab above and go to "Upgrade Selected Port Circuit Pack Firmware" for
more information.
For information on TN802B IP Trunking, refer to the DEFINITY Enterprise Communications
Server Release 7 Installation and Test for Multicarrier Cabinets.
The following sections describe the process:
''Check your shipment'' on page 118
•
''Install a TN2302AP IP Media Processor'' on page 119
•
• ''Install the cables'' on page 119
''Install the circuit packs'' on page 120
•
''Administer the IP Media Processor'' on page 121
•
• ''Test the External Connection to the LAN'' on page 123
For further administration, refer to the Administration for Network Connectivity for Avaya
MultiVantage Software.

Check your shipment

When the order arrives at your site, check the contents (see
119).
Inspect the shipping carton for damage before opening it. If the box is damaged, do not
1
open it. Inform the shipping company, and ask for instructions on filing a claim.
If the box is undamaged, check the contents against the packing slip. Check the condition
2
of each component, and note any damage or shortages on the packing slip. The carton
should contain the items in
Media Processor ordered.
3 Read and follow any directions inserted into the package by the factory.
''Required Hardware'' on page 119
October 2002
''Required Hardware'' on page
for each TN2302AP IP