Relay Connection - Danfoss VLT AutomationDrive Design Manual

Electrical Installation

8.1.4 Relay Connection

To set relay output, see parameter group 5-4* Relays.
8 8
Terminals for relay connection
(Frame sizes A1, A2 and A3).
Terminals for relay connection
(Frame sizes C1 and C2).
168
FC 300 Design Guide
No.
Terminals for relay connection
(Frame sizes A5, B1 and B2).
®
MG.33.BD.02 - VLT is a registered Danfoss trademark
01 - 02 make (normally open)
01 - 03 break (normally closed)
04 - 05 make (normally open)
04 - 06 break (normally closed)