Danfoss VLT AutomationDrive Design Manual page 145

Mechanical Installation - ...
Terminal locations - Rectifier (F1, F2, F3 and F4)
1
7 7
Illustration 7.30 Terminal locations - Rectifier (Left side, front and right side view). The gland plate is 42mm below .0 level.
1) Loadshare Terminal (-)
2) Earth ground bar
3) Loadshare Terminal (+)
Terminal locations - Options Cabinet (F3 and F4)
Illustration 7.31 Terminal locations - Options Cabinet (Left side, front and right side view). The gland plate is 42mm below .0 level.
1) Earth ground bar
144
FC 300 Design Guide
CH22 CH22 CH22 CH22 CH22
CTI25MB
435.5 [17.15]
343.1 [13.51]
FASTENER TORQUE: M8 9.6 Nm (7 FT-LB)
R/L1 91 S/L2 92
193.9 [7.64]
FASTENER TORQUE: M10 19 Nm (14 FT-LB)
DC 89
70.4 [2.77]
0.0 [0.00]
134.6[5.30]
0.0[0.00]
®
MG.33.BD.02 - VLT is a registered Danfoss trademark
CH22
CTI25MB
FASTENER TORQUE: M10 19 Nm (14 FT-LB)
T/L3 93
FASTENER TORQUE: M10 19 Nm (14 FT-LB)
DC 89
2
DIM
A
B
1031.4[40.61]
939.0[36.97]
1
0.0[1.75]
244.4[1.75]
244.4[9.62]
3
LOAD SHARE LOCATION
F1/F2 F3/F4
380.5 [14.98] 29.4 [1.16]
432.5 [17.03] 81.4 [3.20]