Danfoss VLT AutomationDrive Design Manual page 160

Electrical Installation
Mains connector frame size A4/A5 (IP 55/66)
When disconnector is used (frame size A4/A5) the PE must
be mounted on the left side of the drive.
Illustration 8.1 Mains connection frame sizes B1 and B2 (IP 21/
NEMA Type 1 and IP 55/66/ NEMA Type 12).
FC 300 Design Guide
Illustration 8.2 Mains connection size B3 (IP20).
Illustration 8.3 Mains connection size B4 (IP20).
®
MG.33.BD.02 - VLT is a registered Danfoss trademark
95
99
8 8
159