Alcatel-Lucent 7750 SR Manual page 1707

cem
Syntax cem
Context clear>service>id
Description This command clears CEM statistics for this service.
statistics
Syntax statistics
Context clear>service>stats
clear>service>id>authentication
Description
This command clears session statistics for this service.
fdb
Syntax fdb {all | mac ieee-address | sap sap-id] | mesh-sdp sdp-id[:vc-id] | spoke-sdp sdp-id:vc-
id}
Context clear>service>id
Description
This command clears FDB entries for the service.
Parameters
all — Clears all FDB entries.
mac ieee-address — Clears only FDB entries in the FDB table with the specified 48-bit MAC
sap-id — Specifies the physical port identifier portion of the SAP definition. See
mesh-sdp — Clears only service FDB entries associated with the specified mesh SDP ID. For a mesh
spoke-sdp — Clears only service FDB entries associated with the specified spoke SDP ID. For a
sdp-id — The SDP ID for which to clear associated FDB entries.
vc-id — The virtual circuit ID on the SDP ID for which to clear associated FDB entries.
7750 SR OS Services Guide
address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Command Descriptions on page 1933
SDP, the VC ID is optional.
spoke SDP, the VC ID must be specified.
Values
sdp-id[:vc-id]
sdp-id:vc-id
for command syntax.
sdp-id 1 — 17407
vc-id 1 — 4294967295
sdp-id 1 — 17407
vc-id 1 — 4294967295
VPLS Clear Commands
Common CLI
Page 1707