Alcatel-Lucent 7750 SR Manual page 1842

Show, Clear, Debug Commands
Sample Output
*A:ALA-12# show router 3 aggregate
==============================================================================
Aggregates (Service: 3)
==============================================================================
Prefix
------------------------------------------------------------------------------
------------------------------------------------------------------------------
No. of Aggregates: 0
-----------------------------------------------------------
*A:ALA-12#
arp
Syntax arp [ip-address | ip-int-name | mac ieee-mac-addr]
Context show>router
Description
This command displays the router ARP table sorted by IP address.
If no command line options are specified, all ARP entries are displayed.
Parameters ip-addr — Only displays ARP entries associated with the specified IP address.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
Output ARP Table Output — The following table describes ARP table output fields:
Page 1842
AS Set
Aggr AS
Aggr IP-Address
State
No. of Aggregates
Summary
Label
IP Address
MAC Address
Expiry
Displays an aggregate where the path advertised for the route con-
sists of all elements contained in all paths that are being summarized.
Displays the aggregator path attribute to the aggregate route.
The IP address of the aggregated route.
The operational state of the aggregated route.
The total number of aggregated routes.
AS Set Aggr AS
The IP address of the ARP entry.
The MAC address of the ARP entry.
The age of the ARP entry.
Aggr IP-Address
Description
7750 SR OS Services Guide
State