Alcatel-Lucent 7750 SR Manual page 1734

Show, Clear, Debug Commands
1
1
1
1
1
100
200
300
400
------------------------------------------------------------------------------
Number of Bindings Found : 23
------------------------------------------------------------------------------
*A:ALA-12#
sap-using
Syntax sap-using [sap sap-id]
sap-using interface [ip-address | ip-int-name]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using [ingress | egress] filter filter-id
sap-using [ingress | egress] qos-policy qos-policy-id
sap-using authentication-policy policy-name
Context show>service
Description
Displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs. The
optional parameters restrict output to only SAPs matching the specified properties.
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
ingress — Specifies matching an ingress policy.
egress — Specifies matching an egress policy.
qos-policy qos-policy-id — The ingress or egress QoS Policy ID for which to display matching
atm-td-profile td-profile-id — Displays SAPs using this traffic description.
filter filter-id — The ingress or egress filter policy ID for which to display matching SAPs.
authentication policy-name — The session authentication policy for which to display matching
interface — Specifies matching SAPs with the specified IP interface.
ip-addr — The IP address of the interface for which to display matching SAPs.
ip-int-name — The IP interface name for which to display matching SAPs.
Page 1734
301:1
302:1
400:1
500:2
501:1
300:100
301:200
302:300
400:400
Command Descriptions on page 1933 for command syntax.
SAPs.
Values 1 — 65535
Values
1 — 65535
SAPs.
Values
1.0.0.0 — 223.255.255.255
Mesh 0 0
Mesh 0 0
Mesh 0 0
Spok 131070 2001
Mesh 131069 2000
Spok 0 0
Spok 0 0
Spok 0 0
Spok 0 0
7750 SR OS Services Guide