Alcatel-Lucent 7750 SR Manual page 1528

Show, Clear, Debug Commands
sap-using interface [ip-address | ip-int-name]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using [ingress | egress] filter filter-id
sap-using [ingress | egress] qos-policy qos-policy-id
sap-using authentication-policy policy-name
Context show>service
Description
This command displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters
ingress — Specifies matching an ingress policy.
egress — Specifies matching an egress policy.
qos-policy qos-policy-id — The ingress or egress QoS Policy ID for which to display matching
atm-td-profile td-profile-id — Displays SAPs using this traffic description.
filter filter-id — The ingress or egress filter policy ID for which to display matching SAPs.
sap sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
interface ip-address — The IP address of the interface for which to display matching SAPs.
interface ip-int-name — The IP interface name for which to display matching SAPs.
authentication-policy policy name — Specifies an existing authentication policy.
Output Show Service SAP — The following table describes show service SAP output fields:
Page 1528
SAPs.
Values 1 — 65535
Values 1 — 65535
Command Descriptions on page 1933 for command syntax.
Values
1.0.0.0 — 223.255.255.255
Label
Port ID
Svc ID
Sap MTU
Ing. QoS
Ing Fltr
Egr. QoS
Egr. Fltr
Adm
The ID of the access port where the SAP is defined.
The service identifier.
The SAPMTU value.
The SAP ingress QoS policy number specified on the ingress SAP.
The MAC or IP filter policy ID applied to the ingress SAP.
The SAP egress QoS policy number specified on the egress SAP.
The MAC or IP filter policy ID applied to the egress SAP.
The administrative state of the SAP.
Description
7750 SR OS Services Guide