Alcatel-Lucent 7750 SR Manual page 1701

Show Multi-Chassis Endpoint Commands
endpoint
Syntax endpoint [endpoint-name]
Context show>service>id
Description
This command displays service endpoint information.
Parameters endpoint-name — Specifies an endpoint name created in the config>service>vpls context.
Sample Output
*A:Dut-B# show service id 1 endpoint
===============================================================================
Service 1 endpoints
===============================================================================
Endpoint name
Description
Revert time
Act Hold Delay
Ignore Standby Signaling
Suppress Standby Signaling
Block On Mesh Fail
Multi-Chassis Endpoint
MC Endpoint Peer Addr
Psv Mode Active
Tx Active
Tx Active Up Time
Revert Time Count Down
Tx Active Change Count
Last Tx Active Change
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
Spoke-sdp: 221:1 Prec:1
Spoke-sdp: 231:1 Prec:2
===============================================================================
*A:Dut-B#
7750 SR OS Services Guide
: mcep-t1
: (Not Specified)
: 0
: 0
: false
: false
: true
: 1
: 3.1.1.3
: No
: 231:1
: 0d 00:06:57
: N/A
: 5
: 02/13/2009 22:08:33
VPLS Show Commands
Oper Status: Up
Oper Status: Up
Page 1701