Alcatel-Lucent 7750 SR Manual page 1852

Show, Clear, Debug Commands
When either history or suppressed is specified, then the routes learned from those peers that either
have a history or are suppressed (respectively) are listed.
The 'State' field displays the BGP peer's protocol state. In additional to the standard protocol states,
this field can also display the 'Disabled' operational state which indicates the peer is operationally
disabled and must be restarted by the operator.
Parameters
ip-addr — Displays the BGP neighbor with the specified IP address.
family family — Specifies the type of routing information to be distributed by the BGP instance.
filter1 — Specifies route criteria.
filter2 — Specifies route criteria.
Output Standard and Detailed Neighbor — The following table describes the standard and detailed
command output fields for a BGP neighbor:
Page 1852
Values
ipv4, vpn-ipv4
Values
received-routes, advertised-routes, history, suppressed, detail
Values
history, suppressed, detail
Label
Peer
Group
Peer AS
Peer Address
Peer Port
Local AS
Local Address
Local Port
Peer Type
State
The IP address of the configured BGP peer.
The BGP peer group to which this peer is assigned.
The configured or inherited peer AS for the peer group.
The configured address for the BGP peer.
The TCP port number used on the far-end system.
The configured or inherited local AS for the peer group.
The configured or inherited local address for originating peering for
the peer group.
The TCP port number used on the local system.
External — Peer type configured as external BGP peers.
Internal — Peer type configured as internal BGP peers.
Idle — The BGP peer is not accepting connections.
Active — BGP is listening for and accepting TCP connections from
this peer.
Connect — BGP is attempting to establish a TCP connection from
this peer.
Open Sent — BGP has sent an OPEN message to the peer and is
waiting for an OPEN message from the peer.
Description
7750 SR OS Services Guide