Alcatel-Lucent 7750 SR Manual page 1629

fdb
Syntax fdb [sap sap-id [expiry]] | [sdp sdp-id [expiry]] | [mac ieee-address [expiry]] | endpoint
endpoint | [detail] [expiry] [pbb]
Context show>service>id
show>service>fdb-mac
Description This command displays FDB entries for a given MAC address.
Parameters
sap sap-id — Specifies the physical port identifier portion of the SAP. See
Descriptions on page 1933
detail — Displays detailed information.
expiry — Displays time until MAC is aged out.
pbb — Displays PBB related information. This keyword is only applicable to b-vpls or i-vpls
endpoint-name — Specifies an endpoint name up to 32 characters in length.
Show FDB Information — The following table describes service FDB output fields.
7750 SR OS Services Guide
services.
Label
ServID
MAC
Mac Move
Primary Factor
Secondary Factor
Mac Move Rate
for command syntax.
Displays the service ID.
Displays the associated MAC address.
Displays the administrative state of the MAC movement
feature associated with this service.
Displays a factor for the primary ports defining how many
MAC-relearn periods should be used to measure the MAC-
relearn rate.
Displays a factor for the secondary ports defining how
many MAC-relearn periods should be used to measure the
MAC-relearn rate.
Displays the maximum rate at which MAC's can be re-
learned in this service, before the SAP where the moving
MAC was last seen is automatically disabled in order to
protect the system against undetected loops or duplicate
MAC's.
The rate is computed as the maximum number of re-learns
allowed in a 5 second interval: for example, the default rate
of 2 re-learns per second corresponds to 10 re-learns in a 5
second period.
VPLS Show Commands
Common CLI Command
Description
Page 1629