Alcatel-Lucent 7750 SR Manual page 1925

base
Syntax
Context
Description
Output
7750 SR OS Services Guide
Dro. HiPrio
Dro. LoPrio
For. InProf
For. OutProf
Egress Queue 1
For. InProf
For. OutProf
Dro. InProf
Dro. OutProf
-------------------------------------------------------------------------------
CEM SAP Configuration Information
-------------------------------------------------------------------------------
Endpoint Type : NxDS0
Payload Size : 96
Use RTP Header : No
Idle Fill Type : All Ones
===============================================================================
A:sim216#
base
show>service>id
Displays basic information about the service ID including service type, description, SAPs and SDPs.
Show Service-ID Base — The following table describes show service-id base output fields:
Label
Service Id
Vpn Id
Service Type
Description
Customer Id
Last Mgmt Change
Adm
Oper
Mtu
Def. Mesh VC Id
SAP Count
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
The service identifier.
Specifies the VPN ID assigned to the service.
Specifies the type of service.
Generic information about the service.
The customer identifier.
The date and time of the most recent management-initiated change to
this customer.
The administrative state of the service.
The operational state of the service.
The largest frame size (in octets) that the service can handle.
This object is only valid in services that accept mesh SDP bindings. It is
used to validate the VC ID portion of each mesh SDP binding defined
in the service.
The number of SAPs defined on the service.
0
0
0
0
0
0
0
0
Speed : 768
Jitter Buffer : 5
CAS Trunk Framing : No CAS
Idle Pattern : n/a
Description
Page 1925