Alcatel-Lucent 7750 SR Manual page 1510

Show, Clear, Debug Commands
service-using
Syntax service-using [epipe] [ies] [vpls] [vprn] [mirror] [b-vpls] [i-vpls] [m-vpls] [apipe] [fpipe] [ipipe]
[sdp sdp-id] [customer customer-id]
Context show>service
Description
This command displays the services matching certain usage properties. If no optional parameters are
specified, all services defined on the system are displayed.
Parameters
epipe — Displays matching Epipe services.
ies — Displays matching IES instances.
vpls — Displays matching VPLS instances.
i-vpls — Displays matching I-VPLS instances.
b-vpls — Displays matching B-VPLS instances.
m-vpls — Displays matching M-VPLS instances.
vprn — Displays matching VPRN services.
mirror — Displays matching mirror services.
apipe — Displays matching Apipe services.
fpipe — Displays matching Fpipe services.
ipipe — Displays matching Ipipe services.
sdp sdp-id — Displays only services bound to the specified SDP ID.
Default
Values
customer customer-id — Displays services only associated with the specified customer ID.
Default
Values
Output Show Service Service-Using — The following table describes show service service-using output
fields.
Service Id
Type
Adm
Opr
CustomerID
Page 1510
Services bound to any SDP ID.
1 — 17407
Services associated with a customer.
1 — 2147483647
Label
The service identifier.
Specifies the service type configured for the service ID.
The desired state of the service.
The operating state of the service.
The ID of the customer who owns this service.
Description
7750 SR OS Services Guide