Alcatel-Lucent 7750 SR Manual page 1589

sdp
Syntax sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
sdp [sdp-id[:vc-id] | far-end ip-address]
sdp [sdp-id | far-end ip-addr] [detail | keep-alive-history]
Context show>service>id
Description This command displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters
sdp-id — Displays only information for the specified SDP ID. An SDP is a logical mechanism that
far-end ip-addr — Displays only SDPs matching with the specified system IP address of the far-end
detail — Displays detailed SDP information.
Output Show Service SDP — The following table describes show service-id SDP output fields.
7750 SR OS Services Guide
ties a far-end 7750 SR to a particular service without having to specifically define far end SAPs.
Each SDP represents a method to reach a 7750 SR router.
Default
All SDPs.
Values
1 — 17407
destination 7750 SR router for the Service Distribution Point (SDP) that is the termination point
for a service.
Default
SDPs with any far-end IP address.
Label
Sdp Id
Type
Split Horizon
Group
VC Type
VC Tag
I. Lbl
Admin Path MTU
Oper Path MTU
Far End
The SDP identifier.
Indicates whether the SDP is a spoke
Name of the split horizon group where the SDP belongs.
Displays the VC type, ether or vlan.
Displays the explicit dot1Q value used when encapsulating to the SDP
far end.
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
The operating path MTU of the SDP is equal to the admin path MTU
(when one is set) or the dynamically computed tunnel MTU, when no
admin path MTU is set (the default case.)
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
VPLS Show Commands
Description
Page 1589