Alcatel-Lucent 7750 SR Manual page 1592

Show, Clear, Debug Commands
service-using
Syntax service-using [epipe] [ies] [vpls] [vprn] [mirror] [b-vpls] [i-vpls] [m-vpls] [apipe] [fpipe]
[ipipe] sdp sdp-id] [customer customer-id]
Context show>service
Description This command displays the services matching certain usage properties. If no optional parameters are
specified, all services defined on the system are displayed.
Parameters
epipe — Displays matching Epipe services.
ies — Displays matching IES instances.
vpls — Displays matching VPLS instances.
vprn — Displays matching VPRN services.
mirror — Displays matching mirror services.
b-vpls — Displays matching B-VPLS services.
i-vpls — Displays matching I-VPLS services.
apipe — Displays matching Apipe services.
fpipe — Displays matching Fpipe services.
ipipe — Displays matching Ipipe services.
sdp sdp-id — Displays only services bound to the specified SDP ID.
customer customer-id — Displays services only associated with the specified customer ID.
Output Show Service Service-Using — The following table describes show service service-using output
fields:
Sample Output
Page 1592
Default
Services bound to any SDP ID.
Values
1 — 17407
Default Services associated with a customer.
Values
1 — 2147483647
Label
Service Id
Type
Adm
Opr
CustomerID
Last Mgmt Change
The service identifier.
Specifies the service type configured for the service ID.
The administrative state of the service.
The operating state of the service.
The ID of the customer who owns this service.
The date and time of the most recent management-initiated change to
this service.
Description
7750 SR OS Services Guide