Alcatel-Lucent 7750 SR Manual page 1761

host-connectivity-verify
Syntax host-connectivity-verify statistics [sap sap-id]
Context show>service>id
Description Displays host connectivity check statistics.
Parameters
statistics — Displays host connectivity verification data.
sap sap-id — See Common CLI Command Descriptions on page 1933 for command syntax.
Output Show Service Id Host Connectivity Verify — The following table describes show service-id
Sample Output
A:ALA-48>show>service>id# host-connectivity-verify statistics sap 1/1/9:0
==============================================================================
Host connectivity check statistics
==============================================================================
Svc
Id
------------------------------------------------------------------------------
1000
==============================================================================
A:ALA-48>show>service>id#
interface
Syntax interface [ip-address | ip-int-name] [interface-type] [detail] [family]
Context show>service>id
Description This command displays information for the IP interfaces associated with the IES service. If no
optional parameters are specified, a summary of all IP interfaces associated to the service are
displayed.
Parameters
ip-address — The IP address of the interface for which to display information.
7750 SR OS Services Guide
host connectivity verification output fields:
Label
Svc Id
SapId/SdpId
DestIp Address
Last Response
Time Expired
Oper State
SapId/ DestIp
SdpId Address
5/2/3:0 143.144.145.1
The service identifier.
The SAP and SDP identifiers.
The destination IP address.
The time when the last response was received.
Displays whether the interval value has expired.
Displays the current operational state of the service.
Last
Response
IES Show Commands
Description
Time Oper
Expired State
Up
Page 1761