Alcatel-Lucent 7750 SR Manual page 1929

sdp
Syntax
Context
Description
Parameters
Output
7750 SR OS Services Guide
Label
For. InProf
For. OutProf
Ingress TD Profile
Egress TD Profile
Alarm Cell Han-
dling
AAL-5 Encap
sdp [sdp-id | far-end ip-addr] [detail]
show>service>id
Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
sdp-id — Displays only information for the specified SDP ID.
Default
All SDPs.
Values 1 — 17407
far-end ip-addr — Displays only SDPs matching the specified far-end IP address.
Default
SDPs with any far-end IP address.
detail — Displays detailed SDP information.
Show Service-ID SDP — The following table describes show service-id SDP output fields:
Label
Sdp Id
Type
Split Horizon
Group
VC Tag
I. Lbl
Admin Path MTU
Description (Continued)
The number of in-profile packets and octets (rate below CIR) for-
warded by the egress Qchip.
The number of out-of-profile packets and octets (rate above CIR) for-
warded by the egress Qchip.
The profile ID applied to the ingress SAP.
The profile ID applied to the egress SAP.
The indication that OAM cells are being processed.
The AAL-5 encapsulation type.
The SDP identifier.
Indicates whether the SDP is a spoke or a mesh.
Name of the split horizon group that the SDP belongs to.
The explicit dot1Q value used when encapsulating to the SDP far end.
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
The operating path MTU of the SDP is equal to the admin path MTU
(when one is set) or the dynamically computed tunnel MTU, when no
admin path MTU is set (the default case.)
Description
Page 1929