Alcatel-Lucent 7750 SR Manual page 1733

parameter is specified, only services using the specified label are displayed.
If both start-label and end-label parameters are specified, the services using the range of labels X
where start-label <= X <= end-label are displayed.
Use the show router vprn-service-id ldp bindings command to display dynamic labels.
Parameters start-label — The starting ingress label value for which to display services using the label range. If
end-label — The ending ingress label value for which to display services using the label range.
Output Show Service Ingress-Label — The following table describes show service ingress-label output
fields:
Sample Output
*A:ALA-12# show service ingress-label 0
==============================================================================
Martini Service Labels
==============================================================================
Svc Id
------------------------------------------------------------------------------
1
1
1
1
1
1
1
1
1
1
1
1
1
1
7750 SR OS Services Guide
only start-label is specified, services only using start-label are displayed.
Values 0, 2048 — 131071
Default
The start-label value.
Values
2049 — 131071
Label
Svc ID
SDP Id
Type
I.Lbl
E.Lbl
Number of Bindings
Found
Sdp Id
10:1
20:1
30:1
50:1
100:1
101:1
102:1
103:1
104:1
105:1
106:1
107:1
108:1
300:1
The service identifier.
The SDP identifier.
Indicates whether the SDP is spoke or mesh.
The ingress label used by the far-end device to send packets to this
device in this service by the SDP.
The egress label used by this device to send packets to the far-end
device in this service by the SDP.
The number of SDP bindings within the label range specified.
Type I.Lbl
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
Mesh 0
IES Show Commands
Description
E.Lbl
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Page 1733