Alcatel-Lucent 7750 SR Manual page 1552

Show, Clear, Debug Commands
Sample Output
*A:ALA-48>config>service>epipe>sap# show service id 6 base
===============================================================================
Service Basic Information
===============================================================================
Service Id
Service Type
Description
Customer Id
Last Status Change: 02/02/2009 09:27:55
Last Mgmt Change
Admin State
MTU
Vc Switching
SAP Count
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier
-------------------------------------------------------------------------------
sap:1/2/9:0
sdp:2:6 S(10.10.10.104)
===============================================================================
*A:ALA-48>config>service>epipe>sap#
endpoint
Syntax endpoint [endpoint-name]
Context show>service>id
Description
This command displays service endpoint information.
Parameters endpoint-name — Specifies the name of an existing endpoint for the service.
Sample Output
*A:ALA-48>config>service>epipe# show service id 6 endpoint
===============================================================================
Service 6 endpoints
===============================================================================
Endpoint name
Revert time
Act Hold Delay
Tx Active
-------------------------------------------------------------------------------
Members
Page 1552
Label
ISID
: 6
: Epipe
: Distributed Epipe service to east coast
: 6
: 02/02/2009 09:27:57
: Up
: 1514
: False
: 1
: x
: 0
: 0
: none
Description (Continued)
The 24 bit field carrying the service instance identifier associated with
the frame. It is used at the destination PE as a demultiplexor field.
Vpn Id
Oper State
SDP Bind Count
Type
q-tag
n/a
: 6
: Down
: 1
AdmMTU OprMTU
1518 1518
0 0
7750 SR OS Services Guide
Adm Opr
Up Down
Up Down