Alcatel-Lucent 7750 SR Manual page 1686

Show, Clear, Debug Commands
service-id based on the MVR from-vpls definition. Another difference between the VPLS Layer 2
flooding list and IGMP lists is that many IGMP lists may exist (each associated with a different [s,g]
record) and the lists may contain residential SAPs. The SAP chaining and replication behavior is
similar to the VPLS Layer 2 flooding list.
IP multicast packets ingressing the vpls-service-id must match either a [*,g] or [s,g] record to be
associated with the record's egress IP multicast IGMP flooding list. A [*,g] record will match any
ingress IP multicast packet destined to the class D destination IP address represented by "g". An [s,g]
record will match any ingress IP multicast packet with a source IP address matching "s" and a
destination IP address matching "g". In the case that a packet could match both a [*,g] and [s,g]
record, the [s,g] record takes precedence. Each [*,g] and [s,g] record has its own IGMP flooding list.
The list will only appear on an egress forwarding plane (MDA) when a member of the list (VPLS
interface) exists on the forwarding plane.
Parameters service-id — Displays information about the specified service ID or service name.
slot/mda — Specifies a chassis and MDA slot.
grp-ip-address — Specifies a multicast group address.
src-ip-address — Specifies a source IP adress.
starg — Specifies a (*, G) record.
mRouter — Specifies the (*,*) record
ipv6 — Displays IPv6 information.
grp-ipv6-address — ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
src-ipv6-address — ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
Page 1686
Values
service-id: 1 — 214748364
svc-name: A string up to 64 characters in length.
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
multicast group IPv6 address
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
7750 SR OS Services Guide