Alcatel-Lucent 7750 SR Manual page 1651

sap
Syntax sap sap-id [filter]
Context show>service>id
Description This command displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap sap-id — The ID that displays SAPs for the service in the slot/mda/port[.channel] form. See
detail — Displays detailed information for the SAP.
filter — Specifies a search term to narrow down the results.
Output Show Service-ID SAP — The following table describes show service SAP fields:
.
7750 SR OS Services Guide
Common CLI Command Descriptions on page 1933
Values
atm, base, detail, dhcp, mc-ring, mcac, mrp, qos, sap-stats, stats, stp, sub-mgmt
Label
Service Id
SAP
Encap
Ethertype
Admin State
Oper State
Flags
Last Status Change
Last Mgmt Change
Admin MTU
The service identifier.
The SAP and qtag.
The encapsulation type of the SAP.
Specifies an Ethernet type II Ethertype value.
The administrative state of the SAP.
The operational state of the SAP.
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown,
SapIngressQoSMismatch, SapEgressQoSMismatch,RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown,
NoSapIpipeCeIpAddr, TodResourceUnavail,
TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing,
ServiceMTUTooSmall, SapIngressNamedPoolMismatch,
SapEgressNamedPoolMismatch, NoSapEpipeRingNode.
Specifies the time of the most recent operating status change to this
SAP
Specifies the time of the most recent management-initiated change to
this SAP.
The largest service frame size (in octets) that can be transmitted
through the SAP to the far-end router, without requiring the packet to
be fragmented.
VPLS Show Commands
for command syntax.
Description
Page 1651