Alcatel-Lucent 7750 SR Manual page 1793

Admin State
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-12#
sdp-using
Syntax sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context show>service
Description
Display services using SDP or far-end address options.
Parameters
sdp-id — Displays only services bound to the specified SDP ID.
vc-id — The virtual circuit identifier.
far-end ip-address — Displays only services matching with the specified far-end IP address.
Output Show Service SDP Using X — The following table describes show service sdp-using output
fields.
Sample Output
*A:ALA-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId
-------------------------------------------------------------------------------
1
2
100
7750 SR OS Services Guide
: Up
Values
1 — 17407
Values 1 — 4294967295
Default
Services with any far-end IP address.
Label
Svc ID
Sdp ID
Type
Far End
Oper State
Ingress Label
Egress Label
SdpId
300:1
300:2
300:100
Oper State
The service identifier.
The SDP identifier.
Type of SDP: spoke or mesh.
The far end address of the SDP.
The operational state of the service.
The label used by the far-end device to send packets to this device
in this service by this SDP.
The label used by this device to send packets to the far-end device
in this service by this SDP.
Type Far End
Mesh 10.0.0.13
Spok 10.0.0.13
Mesh 10.0.0.13
VPRN Show Commands
: Down
Description
Opr State I.Label
Up 131071
Up 131070
Up 131069
Page 1793
E.Label
131071
131070
131069