Alcatel-Lucent 7750 SR Manual page 1221

Parameters ip-address — The IP address of the NetBIOS name server. This address must be unique within the
netbios-node-type
Syntax netbios-node-type netbios-node-type
no netbios-node-type
Context config>service>vprn>dhcp>server>pool>options
Description This command configures the Network Basic Input/Output System (NetBIOS) node type.
Default
none
Parameters
netbios-node-type — Specifies the netbios node type.
subnet
Syntax subnet {ip-address/mask | ip-address netmask} [create]
no subnet {ip-address/mask | ip-address netmask}
Context config>service>vprn>dhcp>server>pool
Description This command creates a subnet of IP addresses to be served from the pool. The subnet cannot include
any addresses that were assigned to subscribers without those addresses specifically excluded. When
the subnet is created no IP addresses are made available until a range is defined.
Default none
Parameters ip-address — Specifies the base IP address of the subnet. This address must be unique within the
mask — The subnet mask in dotted decimal notation. Allowed values are dotted decimal addresses in
netmask — Specifies a string of 0s and 1s that mask or screen out the network part of an IP address so
create — Keyword used to create the entity. The create keyword requirement can be enabled/
7750 SR OS Services Guide
subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range
1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
Values
B — Broadcast node uses broadcasting to query nodes on the network for the
owner of a NetBIOS name.
P — Peer-to-peer node uses directed calls to communicate with a known NetBIOS
name server for the IP address of a NetBIOS machine name.
M — Mixed node uses broadcasted queries to find a node, and if that fails, queries
a known P-node name server for the address.
H — Hybrid node is the opposite of the M-node action so that a directed query is
executed first, and if that fails, a broadcast is attempted.
subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range
1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
the range 128.0.0.0 – 255.255.255.252. Note that a mask of 255.255.255.255 is reserved for
system IP addresses.
that only the host computer part of the address remains.
disabled in the environment>create context.
Virtual Private Routed Network Services
Page 1221