Alcatel-Lucent 7750 SR Manual page 1778

Show, Clear, Debug Commands
Parameters all — Clears all FDB entries.
mac ieee-address — Clears only FDB entries in the FDB table with the specified 48-bit MAC
sap sap-id — Clears the specified SAP information. See Common CLI Command Descriptions on
mesh-sdp — Clears only service FDB entries associated with the specified mesh SDP ID. For a mesh
spoke-sdp — Clears only service FDB entries associated with the specified spoke SDP ID. For a
sdp-id — The SDP ID for which to clear associated FDB entries.
vc-id — The virtual circuit ID on the SDP ID for which to clear associated FDB entries.
site
Syntax site service-id
Context clear>service>id
Description This command clears site-specific information for the service.
Parameters
service-id — Specifies the service ID or service name up to 64 characters in length.
spoke-sdp
Syntax
spoke-sdp sdp-id:vc-id ingress-vc-label
Context clear>service>id
Description
Clears and resets the spoke SDP bindings for the service.
Parameters sdp-id — The spoke SDP ID to be reset.
vc-id — The virtual circuit ID on the SDP ID to be reset.
stp
Page 1778
address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
page 1933 for command syntax.
SDP, the VC ID is optional.
spoke SDP, the VC ID must be specified.
Values
1 — 17407
Default For mesh SDPs only, all VC IDs.
Values
1 — 4294967295
Values 1 — 2147483648
Values
1 — 17407
Values 1 — 4294967295
7750 SR OS Services Guide