Alcatel-Lucent 7750 SR Manual page 1837

sdp
Syntax sdp [sdp-id | far-end ip-addr] [detail]
Context show>service>id
Description Displays information for the SDPs associated with the service. If no optional parameters are
specified, a summary of all associated SDPs is displayed.
Parameters
sdp-id — Displays only information for the specified SDP ID.
far-end ip-addr — Displays only SDPs matching with the specified far-end IP address.
detail — Displays detailed SDP information.
Output Show Service-ID SDP — The following table describes show service-id SDP output fields:
7750 SR OS Services Guide
Default All SDPs.
Values 1 — 17407
Default
SDPs with any far-end IP address.
Label
Sdp Id
Type
Split Horizon
Group
VC Type
VC Tag
I. Lbl
Admin Path MTU
Oper Path MTU
Far End
Delivery
Admin State
Oper State
Ingress Label
The SDP identifier.
Indicates whether the SDP is a spoke or a mesh.
Name of the split horizon group that the SDP belongs to.
Displays the VC type: ether or vlan.
Displays the explicit dot1Q value used when encapsulating to the SDP
far end.
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
The operating path MTU of the SDP is equal to the admin path MTU
(when one is set) or the dynamically computed tunnel MTU, when no
admin path MTU is set (the default case.)
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
Specifies the type of delivery used by the SDP: GRE or MPLS.
The administrative state of this SDP.
The operational state of this SDP.
The label used by the far-end device to send packets to this device in
this service by this SDP.
VPRN Show Commands
Description
Page 1837