Alcatel-Lucent 7750 SR Manual page 1765

sap
Syntax sap sap-id [detail]
Context show>service>id
Description Displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap-id — The ID that displays SAPs for the service in the slot/mda/port[.channel format. See
detail — Displays detailed information for the SAP.
Output Show Service-ID SAP — The following table describes show service SAP fields:
7750 SR OS Services Guide
Common CLI Command Descriptions on page 1933 for command syntax.
Label
Service Id
SAP
Encap
Ethertype
Admin State
Oper State
Flags
Last Status Change
Last Mgmt Change
Admin MTU
Ingress qos-pol-
icy
Egress qos-policy
Ingress Filter-Id
The service identifier.
The type of SAP.
The encapsulation type of the SAP.
Specifies an Ethernet type II Ethertype value.
The administrative state of the SAP.
The operational state of the SAP.
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown,
SapIngressQoSMismatch, SapEgressQoSMismatch,RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooS-
mall, SapIngressNamedPoolMismatch, SapEgressNamedPoolMis-
match, NoSapEpipeRingNode.
Specifies the time of the most recent operating status change to this
SAP.
Specifies the time of the most recent management-initiated change to
this SAP.
The desired largest service frame size (in octets) that can be transmitted
through the SAP to the far-end router, without requiring the packet to be
fragmented.
The ingress QoS policy ID assigned to the SAP.
The egress QoS policy ID assigned to the SAP.
The ingress filter policy ID assigned to the SAP.
IES Show Commands
Description
Page 1765