Alcatel-Lucent 7750 SR Manual page 1876

Show, Clear, Debug Commands
peer
Syntax peer [ip-int-name]
Context show>router>rip
Description Displays RIP peer information.
Parameters
ip-int-name — Dispays peer information for peers on the specified IP interface.
Output Show RIP Peer Output — The following table describes the command output fields for a RIP
peer:
statistics
Syntax statistics [ip-addr | ip-int-name]
Context show>router>rip
Description Display Interface level statistics for the RIP protocol.
If no IP address or interface name is specified, then all configured RIP interfaces are displayed.
If an IP address or interface name is specified, then only data regarding the specified RIP interface is
displayed.
Parameters
ip-addr | ip-int-name — Displays statistics for the specified IP interface.
Output Show RIP Statistics Output — The following table describes the output fields for RIP statistics.
Sample Output
Page 1876
Default Display peers for all interfaces.
Label
Peer IP Addr
Interface Name
Version
Last Update
No. of Peers
Label
Learned Routes
Timed Out Routes
Current Memory
The IP address of the peer router.
The peer interface name.
The version of RIP running on the peer.
The number of days since the last update.
The number of RIP peers.
The number of RIP-learned routes were exported to RIP neighbors.
The number of routes that have been timed out.
The amount of memory used by this RIP router instance.
Description
Description
7750 SR OS Services Guide