Alcatel-Lucent 7750 SR Manual page 1788

Show, Clear, Debug Commands
sap-using
Syntax sap-using [sap sap-id]
sap-using interface [ip-address | ip-int-name]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using [ingress | egress] filter filter-id
sap-using [ingress | egress] qos-policy qos-policy-id
sap-using authentication-policy policy-name
Context show>service
Description
This command displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See
interface — Specifies matching SAPs with the specified IP interface.
ip-address — The IP address of the interface for which to display matching SAPs.
ip-int-name — The IP interface name for which to display matching SAPs.
ingress — Specifies matching an ingress policy.
egress — Specifies matching an egress policy.
qos-policy qos-policy-id — The ingress or egress QoS Policy ID for which to display matching
atm-td-profile td-profile-id — Displays SAPs using this traffic description.
filter filter-id — The ingress or egress filter policy ID for which to display matching SAPs.
authentication-policy policy name — Specifies an existing authentication policy.
Output Show Service SAP — The following table describes show service SAP output fields:
Page 1788
Command Descriptions on page 1933
Values
1.0.0.0 — 223.255.255.255
SAPs.
Values
1 — 65535
Values
1 — 65535
Label
Port ID
Svc ID
SapMTU
I.QoS
I.MAC/IP
E.QoS
for command syntax.
The ID of the access port where the SAP is defined.
The service identifier.
The SAP MTU value.
The SAP ingress QoS policy number specified on the ingress SAP.
The MAC or IP filter policy ID applied to the ingress SAP.
The SAP egress QoS policy number specified on the egress SAP.
Common CLI
Description
7750 SR OS Services Guide