Alcatel-Lucent 7750 SR Manual page 1517

cfm-stack-table
Syntax cfm-stack-table [port [port-id [vlan vlan-id]] | sdp sdp-id[:vc-id]] [level 0..7] [direction up | down]
Context show>eth-cfm
Description
This command displays stack-table information.
Parameters
port port-id — Displays the bridge port or aggregated port on which MEPs or MHFs are configured.
vlan vlan-id — Displays the associated VLAN ID.
sdp sdp-id[:vc-id] — Displays the SDP binding for the bridge.
level — Display the MD level of the maintenance point.
Values
direction up | down — Displays the direction in which the MP faces on the bridge port.
Output Show eth-cfm CFM Stack Table Command Output — The following table describes show eth-cfm
CFM stack table command output fields:
Sap
Sdp
Level Dir
Md-index
Ma-index
Mep-id
Mac-address
Sample Output
*A:node-1# show eth-cfm cfm-stack-table
========================================================================
eth-cfm CFM SAP Stack Table
========================================================================
Sap
------------------------------------------------------------------------
1/2/1
1/2/3:100
1/2/3:*
========================================================================
eth-cfm CFM SDP Stack Table
========================================================================
Sdp
7750 SR OS Services Guide
0 — 7
Label
Displays associated SAP IDs.
Displays the SDP binding for the bridge.
Displays the MD level of the maintenance point.
Displays the the maintenance domain (MD) index.
Displays the the maintenance association (MA) index.
Displays the integer that is unique among all the MEPs in the same
MA.
Displays the MAC address of the MP.
Level Dir Md-index
4 Up 1
4 Up 1
4 Up 1
Level Dir Md-index
Description
Ma-index Mep-id Mac-address
1 5 ac:48:01:02:00:01
1 1 ac:48:01:02:00:03
1 4 ac:48:01:02:00:03
Ma-index Mep-id Mac-address
Service Commands
Page 1517